Hanging the first strip of unpasted wallpaper is crucial in achieving a professional-looking result. This guide will provide step-by-step instructions on adequately hanging the initial panel, ensuring it is straight, paving the way for a successful wallpapering project.

  1. Prepare the wall: Start by cleaning and prepping the wall to ensure a smooth and clean surface for the wallpaper to adhere to.
  2. Measure and cut: Measure the height of the wall and add a few inches for trimming. Cut your first strip of wallpaper accordingly, ensuring it is long enough to cover the full size of the wall.
  3. Mix adhesive: Following the manufacturer's instructions, mix the wallpaper adhesive in a clean container.
  4. Apply adhesive: Use a paint roller or brush to evenly apply the adhesive to the wall, ensuring full coverage.
  5. Mark a vertical line: Use a plumb line or level to draw a straight vertical line on the wall where you want to hang the first strip, ensuring proper alignment.
  6. Hang the strip: Unfold the wallpaper strip and carefully align it with the vertical line, starting at the top of the wall. Smooth out any bubbles or wrinkles using a wallpaper smoother or brush.
  7. Trim excess: Use a sharp utility knife to trim any excess wallpaper at the top and bottom of the wall for a clean edge.

To successfully hang the first strip of unpasted wallpaper, follow these steps to ensure a smooth and professional result. Begin by preparing the wall and cutting the wallpaper strip to the appropriate length. Mix and apply adhesive to the strip, then fold and book it. Draw a vertical line on the wall for alignment, and carefully hang the strip, smoothing out any imperfections. Finally, trim any excess material for a clean finish. Following these steps will set the foundation for a successful wallpaper installation.